STANDARD Flexible Solar Panel
With the core of SUNBEAMsystem advantages.
SUNBEAMsystem offers a wide range of specialized flexible solar panel models but for general usage the standard model will do the job ahead of the competitors.
SUNBEAMsystem panels are not only smaller but also lighter.
Clean design and a high finish. White color behind dark cells with no visible internal wires.
All panels are made to endure tough marine environments with quality down to the detail.
- Flexible 60o/m
- 3mm Thin
- Light weight
|SP18f||18W||23.7V||0.99A||19.4V||0.92A||0.8 lbs||17.1 x 10.9|
SP100 is not intended for temporary use or on top of canvas. We recommend the SP50QF or SP50
For permanent fitting use the stainless steel grommets or preferably use a flexible glue like Sikaflex-291. Some glue along the outer edge is usually sufficient for a permanent bond.
FLUSH Solar panels
The preferred choice for deck fitting.
With no junction box the Flush model is the preferred choice for deck fittings.
Enabled by a flat cable with a minimal outside and maximized inside featuring 16 AWG wires. As on the other models the wires are pre tinned for the lowest resistance and longevity.
SUNBEAMsystem Flush is available both with Standard surface and as the more durable Tough-Flush with anti-skid surface.
For fitting use the stainless steel grommets or preferably use a flexible glue like Sikaflex-291. Some glue along the outer edge is usually sufficient for a permanent bond. but make sure to put some extra around the cable to even out the support under the panel.